Is your door squeaking like a rusty gate, sagging noticeably, or refusing to close properly? Often, the culprit isn't the door itself, but worn-out or damaged hinges. The good news is that replacing door hinges is a surprisingly straightforward DIY project that most homeowners and renters can tackle in an hour or less, saving you money and restoring your door's function and appearance.

## Quick plan (TL;DR)

*   **Assess:** Identify hinge type, size, and finish needed.
*   **Gather:** Collect all necessary tools and materials before starting.
*   **Support:** Use shims or blocks to support the door's weight.
*   **Remove:** Detach old hinges carefully, one by one.
*   **Prepare:** Clean mortises, fill old screw holes if necessary.
*   **Install:** Attach new hinges to the door frame, then the door.
*   **Test:** Open and close the door, making adjustments as needed.
*   **Enjoy:** Your newly functional, quiet door!

## Before you start (scope, skill level, what can go wrong)

This guide focuses on replacing standard interior door butt hinges, the most common type found in homes. While the principles are similar for exterior doors, they may involve heavier doors or more complex security features, which might be best left to a professional if you're not comfortable. This project is ideal for those with basic DIY skills and can significantly improve a door's alignment, eliminate squeaks, and upgrade aesthetics.

**What can go wrong?** The most common issues include stripping screw heads, misaligning the door, or choosing the wrong hinge size. By following the steps carefully and taking your time, these pitfalls are easily avoided.

## Tools & materials

Having everything ready before you begin will make the process smoother and faster.

### Tools

*   Phillips head screwdriver (manual or drill driver with appropriate bit)
*   Pencil
*   Utility knife or chisel (for cleaning mortises)
*   Measuring tape or ruler
*   Wood shims, wedges, or books/blocks (to support the door)
*   Safety glasses
*   Hammer (optional, for tapping shims or chisel)
*   Drill (optional, for pilot holes or if screw holes are damaged)

### Materials

*   New door hinges (ensure they match the old ones in size, corner radius, and finish)
*   Longer wood screws (at least one per hinge for the door frame side, typically 2.5-3 inches)
*   Wood filler, toothpicks, or wood glue (for stripped screw holes)
*   Paint primer and paint (if touching up hinge mortises or door frame)

## Time, cost, and difficulty

*   **Time:** Expect to spend about 30-60 minutes per door, depending on your experience level and how easily the old hinges come off.
*   **Cost:** A set of new hinges (typically two or three per door) can range from $10-$50, largely depending on the material, finish, and brand. Wood filler and longer screws are usually just a few dollars each.
*   **Difficulty:** This is generally considered an **easy to moderate** DIY project. It requires careful measurement and patience but doesn't involve complex techniques or specialized tools.

## Step-by-step instructions

Let's get your door working perfectly again!

1.  **Gather Your Tools and Materials**
    *   Ensure you have all items from the lists above. Nothing's more frustrating than stopping mid-project for a missing screw!

2.  **Safety First!**
    *   Put on your safety glasses. While not a high-impact task, small wood splinters or metal fragments can fly. Be aware of the door's weight to avoid pinching fingers or dropping it.

3.  **Support the Door**
    *   Open the door slightly. Place wood shims, wedges, or a stack of books under the bottom edge of the door to take its weight off the hinges. This prevents the door from falling or swinging unexpectedly once screws are removed.

4.  **Remove the Old Hinges**
    *   **Rule of thumb:** To maintain stability, start by removing screws from the top hinge first, then the middle (if present), and finally the bottom hinge. Begin with the screws on the door frame side, then the door leaf side.
    *   Use your screwdriver to carefully remove all screws from the hinges. If a screw is stuck, a bit of penetrating oil or a hand impact driver might help.
    *   Once all screws are out, the hinges should lift away easily. Place them aside.

5.  **Clean and Inspect Hinge Mortises**
    *   The mortise is the recessed area where the hinge sits. Use a utility knife or chisel to gently scrape away any paint, debris, or old wood filler from these areas. The new hinges need to sit perfectly flush for proper door operation.
    *   Check for damage to the wood around the screw holes. If the wood is splintered or crumbling, you'll need to repair it.

6.  **Prepare Screw Holes (Checkpoint: Are your screw holes secure?)**
    *   If any screw holes are stripped or too wide to hold a screw firmly, you'll need to fill them. You can use wood filler, toothpicks dipped in wood glue, or even golf tees. Let the filler dry completely according to manufacturer instructions. Once dry, you may need to drill new pilot holes (slightly smaller than your screw diameter) to prevent splitting the wood, especially for the longer screws.
    *   This is also the time to consider using one or two longer screws (2.5-3 inches) per hinge on the door frame side. These longer screws will go deeper into the door frame stud, providing much better support and preventing future sagging.

    *   [ ] Hinge mortises are clean and clear.
    *   [ ] All screw holes are sound or have been properly filled and dried.
    *   [ ] Longer screws are ready for the frame side.

7.  **Install New Hinges on the Door Frame**
    *   Hold each new hinge leaf (the part that attaches to the frame) flush in its respective mortise on the door frame. Ensure the hinge pin faces upwards on all hinges.
    *   Carefully drive in the screws, ensuring they go in straight. Don't overtighten, as this can strip the wood or damage the hinge.

8.  **Attach Door to Frame**
    *   With the door still supported by shims, align the hinge leaves on the door with those on the door frame. You might need a helper for this step to hold the door steady.
    *   Insert the hinge pins to connect the leaves. Start with the top hinge, then the bottom, and finally the middle.
    *   Once the pins are in, remove the shims and slowly test the door.

9.  **Test and Adjust**
    *   Open and close the door several times. Does it swing freely? Does it latch correctly? Is there any binding or scraping?
    *   If the door sags, try tightening the longer screws on the top hinge into the frame. If it binds, you might need to slightly loosen screws and gently adjust the hinge position, then re-tighten. Small adjustments can make a big difference.

10. **Final Check**
    *   Ensure all screws are snug (but not overtightened). Wipe away any pencil marks or debris. You're done!

## Common mistakes to avoid

*   **Not supporting the door:** This is crucial! A falling door can cause injury or damage.
*   **Choosing the wrong hinge type/size:** Hinges come in various sizes, corner radius (square vs. rounded), and pin types. Match your old ones precisely unless you plan to chisel new mortises.
*   **Overtightening screws:** This can strip the wood, making the hinge loose and requiring repairs.
*   **Not replacing all hinges:** If one hinge is worn, the others are likely following suit. Replacing all simultaneously ensures even wear and better door function.
*   **Ignoring stripped screw holes:** New hinges won't hold if the screws have nothing to bite into. Always repair stripped holes.

## Troubleshooting

Here are common issues and how to fix them:

*   **Symptom:** Door sags or rubs at the top latch side.
    *   **Likely Cause:** Insufficient support from hinges, especially the top one.
    *   **Fix:** Ensure the top hinge's screws, particularly the longer ones into the frame stud, are tight. If screws are stripped, fill holes and re-drill pilot holes.

*   **Symptom:** Door squeaks after hinge replacement.
    *   **Likely Cause:** New hinges might need lubrication, or the hinge pin isn't seated correctly.
    *   **Fix:** Apply a small amount of silicone-based lubricant (avoid oil, as it attracts dirt) to the hinge pins. Ensure pins are fully seated.

*   **Symptom:** Door binds or rubs on the frame near a hinge.
    *   **Likely Cause:** Hinge mortise is too deep, or the hinge is not seated flush.
    *   **Fix:** Check that hinges are perfectly flush. If a mortise is too deep, remove the hinge, place a thin shim (like a piece of cardstock) behind the hinge in the mortise, and reattach.

*   **Symptom:** Screws spin and don't tighten.
    *   **Likely Cause:** Stripped screw hole.
    *   **Fix:** Remove the screw. Fill the hole with wood filler, toothpicks, or a golf tee and wood glue. Let it dry, then drill a new pilot hole and reinsert the screw. Consider using a slightly longer screw if space allows.

*   **Symptom:** A gap appears between the door and the frame.
    *   **Likely Cause:** Hinges are not fully recessed or are slightly twisted.
    *   **Fix:** Loosen hinge screws, push the hinge firmly into its mortise, and re-tighten. Ensure the hinge is not bent or damaged.

## Safety notes

*   **Eye Protection:** Always wear safety glasses to protect against wood dust, paint chips, or errant tools.
*   **Pinch Points:** Be mindful of where you place your hands when handling the door, especially when attaching or detaching it. Fingers can easily get pinched between the door and the frame.
*   **Lifting:** Doors can be surprisingly heavy. If you're struggling to support the door, ask for help from another person or use robust door jacks if available.
*   **Tool Usage:** Use the correct size screwdriver for your hinge screws to prevent stripping the screw heads or damaging the driver bit. If using a drill, set it to a low torque setting to avoid overtightening.
*   **Electrical/Plumbing/Gas:** While hinge replacement is generally low risk, always be aware of what's behind walls, especially if drilling deeper for longer screws. If you suspect electrical wires, plumbing pipes, or gas lines are in the drill path, stop and consult a professional.

## FAQ

**Q: Do I need to remove the entire door to replace the hinges?**
**A:** Not necessarily. If you can support the door adequately with shims, you can often replace hinges without fully removing the door from the frame. This guide details that approach.

**Q: How do I choose the correct size and type of hinge?**
**A:** The easiest way is to remove an old hinge and take it to the store. Match the height, width (when open), and the corner radius (square or rounded) exactly. Ensure the screw hole pattern also matches.

**Q: Can I just replace one hinge if only one is bad?**
**A:** While technically possible, it's generally recommended to replace all hinges on a door at the same time. Hinges wear out together, and replacing only one might lead to uneven stress and premature failure of the others.

**Q: What if the screw holes on the new hinge don't line up perfectly with the old ones?**
**A:** If the new hinges are the exact same size and type, the holes *should* line up. If not, you might have purchased slightly different hinges. If the difference is minor, you may need to fill the old holes and drill new pilot holes precisely where needed for the new hinge.

**Q: Can I paint the hinges to match my door?**
**A:** It's generally not recommended to paint door hinges, as the paint can chip, flake, and interfere with the hinge's smooth operation. It's better to purchase hinges in the desired finish.

**Q: How often should door hinges be replaced?**
**A:** Hinges typically last for many years, often decades. They should be replaced when they show signs of significant wear, such as excessive looseness, bending, severe rust, or if they contribute to the door sagging or binding despite lubrication.

## Sources & claims handling

For best practices and specific product information, always consult:

*   Manufacturer's installation instructions for your specific hinges
*   Local building code authority (for any structural or fire-rated door considerations)
*   Occupational Safety and Health Administration (OSHA)
*   U.S. Consumer Product Safety Commission (CPSC)
*   Underwriters Laboratories (UL)
*   National Fire Protection Association (NFPA)

With a bit of patience and the right tools, replacing door hinges is a rewarding project that significantly improves your home's functionality and comfort. By following these steps and prioritizing safety, you'll have your doors swinging smoothly and quietly in no time. Enjoy your upgraded doors!

Learn how easy it is to replace door hinges yourself! This DIY guide covers tools, steps, and troubleshooting for homeowners and renters to fix saggy doors or upgrade hardware safely.

Hardware Upgrade — posts & guides

Replace Door Hinges: A Simple DIY Guide for Homeowners